Pool Remodeling in Inglewood
Services We Offer
Our Pool Remodeling Process in Inglewood
What Pool Remodeling in Inglewood Actually Involves
Pool remodeling in Inglewood begins with a careful walk-through of the pool shell, deck, equipment pad, and surrounding yard so we can see what is worn, what is failing, and what you want to improve. Because much of Inglewood’s housing stock dates to postwar tract development from the late 1940s through the 1950s, pools on those properties have often been in the ground for decades, and the shell, plumbing, and equipment reflect that age. You choose the interior finish, waterline tile, coping, and decking before demolition starts, and we work through drowning prevention features with you so the permit submittal goes in complete. Plans and required energy forms go to the City of Inglewood Building and Safety Division, and we handle plan check responses through approval.
Once the permit is issued, the pool is drained and old tile, coping, and decking come out. Shell repairs, plumbing, equipment, and electrical work follow, then tile, coping, and the new deck surface. The interior finish is applied last, the pool is filled, and we bring it through the start-up period the finish manufacturer specifies. Final inspection covers the required safety features, and we walk you through operating the new equipment before we close the job.
Read More →
Pool remodeling projects in Inglewood are permitted through the City of Inglewood Building and Safety Division, and the process is more straightforward than many homeowners expect. No unusual local overlay applies here, which means the California building code and the age of your specific house are the two things that actually drive the requirements. That second factor matters in a city where so much of the housing stock dates to the postwar tract-building era of the late 1940s and 1950s. A pool tied to a home built in Inglewood Knolls in 1953 or 1954, for example, may have older shell construction, outdated equipment, and electrical runs that predate modern code entirely. We sort out the permit triggers at the design stage, before any work is priced or scheduled. Not every repair requires a permit, but structural shell work, a change in shape or depth, adding a spa, a new heater, and new gas or electrical runs are the common ones, and the building department makes the final call on each.
A permit for remodeling a pool or spa at a single-family residence brings California’s Swimming Pool Safety Act into the picture. Under Health and Safety Code Section 115922, the pool must have at least two of seven listed drowning prevention features at the time of final inspection. Those features include an enclosure that isolates the pool from the house, removable mesh fencing with a self-closing and self-latching gate, an approved safety cover, exit alarms or self-closing and self-latching devices on doors that access the pool, and a pool alarm. The inspector confirms compliance before the permit closes.
Drain covers are addressed separately under the federal Virginia Graeme Baker Act, which requires that all drain covers sold in the United States meet an anti-entrapment standard. We replace non-compliant covers as part of the standard scope. On the energy side, California Title 20 rules require that replacement dedicated-purpose pool pump motors of 0.5 total horsepower or more, manufactured after July 19, 2021, be variable-speed. California’s current energy code also restricts the heat source for newly installed pool and spa heating, though an exception exists for alterations to pools that already have a heater in place. New lights, equipment, and any metal near the water must also satisfy the bonding and GFCI requirements in the California Electrical Code, so a licensed electrician evaluates the existing bonding when the deck is removed.
Draining the pool is when the shell condition becomes visible, and that inspection informs the final scope. Surface crazing is expected on older plaster, but structural cracks in a gunite or shotcrete shell, or a failed bond beam beneath the coping, have to be repaired before any new finish is applied. Those repairs are written into a change order before work proceeds. In neighborhoods like Morningside Park, Fairview Heights, Inglewood Knolls, and Century Heights, homeowners associations frequently review decking choices, fencing design, and equipment placement, so we build that review into the schedule alongside the city permit process.
Other Remodeling Services We Offer
A kitchen remodel touches more trades than any other room in the house: layout, cabinetry, plumbing, electrical, ventilation and finishes. Horizon designs and builds kitchen remodels under one contract, from the measured layout to the final inspection.
Whether you envision a classic Southern California pool or a fully customized backyard oasis, Horizon Construction & Remodeling delivers the highest level of quality and service. Our comprehensive pool design and remodeling services cover everything from layout and decking to built-in BBQs and final touches like landscaping. Let Horizon be your trusted partner in transforming your backyard into the perfect outdoor retreat.
If you are planning a complete bathroom remodel or simply want to change your tub, shower, update your plumbing fixtures, or make the space more efficient, our team at Horizon will help you through the process with expert advice, professional craftsmanship, and affordable options with beautiful results. Learn more about our bathroom remodeling services.
Transform your space with our expert interior work services. We offer a comprehensive range of solutions — from space planning and custom design to the selection of high-quality finishes and materials. Our team of experienced professionals works closely with you to create a space that’s both functional and stylish, tailored to your unique needs, goals, and budget. Whether you’re updating a single room or overhauling your entire interior, we bring precision, creativity, and craftsmanship to every project.
At Horizon, we believe your home is more than just four walls — it’s where life happens. It’s the place you relax, gather with family and friends, and create lasting memories. That’s why we offer a full range of exterior work services designed to elevate your outdoor living space. From patios and hardscaping to custom decks and exterior renovations, we help turn your vision into a dream yard that complements your lifestyle and enhances curb appeal.
At Horizon Construction & Remodeling, our expert team includes a dedicated design and planning division that works hand-in-hand with licensed architects and structural engineers. We take care of everything — from detailed plans and blueprints to securing city permits — so you don’t have to deal with delays or red tape. Our goal is to streamline the process and provide a fully approved set of documents that aligns with both your vision and city regulations, saving you time and stress.
Why Choose Horizon Remodeling For Pool Remodeling in Inglewood
Pool remodeling in Inglewood works best when it is planned as part of a broader backyard project rather than a standalone job. We are a licensed and bonded Class B general building contractor, active since 2009, and we coordinate pool resurfacing, decking, hardscape, patio covers, and outdoor kitchens under a single contract with one project manager. Pool-specific work is performed by appropriately licensed subcontractors operating under that same contract.
Running everything through one plan matters in a practical way. When the deck, equipment pad, and any gas or electrical rough-in are drawn together from the start, finished concrete does not get cut open later to accommodate a line that was not accounted for. Permits go through the City of Inglewood Building and Safety Division, and in a neighborhood like Inglewood Knolls, where postwar tract homes from the early 1950s often sit on compact lots, coordinating trades in sequence keeps the project from stalling.
Many Inglewood homes date to that same postwar building wave, and the age of the structure is what typically governs code requirements here. Our proposals are written line by line so you can see exactly what each scope of work involves and decide what fits your budget now.
Schedule a Consultation
Pool Remodeling FAQ
How do I know if my pool in Inglewood needs resurfacing or just a repair?
A chipped step or a few loose tiles often calls for a targeted repair rather than a full resurface, but when the surface is rough, stained, flaking, or sounds hollow when tapped across a wider area, resurfacing is the more practical path. Water loss that outpaces normal evaporation is another sign worth investigating. We inspect the pool in person, and once it is drained we can determine whether cracks are limited to the finish or extend into the shell, since that distinction directly shapes the scope of work needed for your Inglewood home.
Does a pool remodel need a permit?
Pool remodeling in Inglewood typically does require a permit, though a straight replaster with no other changes may not. Work such as adding a spa, altering the shell, structural repair, installing a new heater, or new gas and electrical work almost always triggers a permit application through the City of Inglewood Building and Safety Division. We handle the application, plan check, and inspections either way, and a permitted remodel also brings in California’s drowning prevention requirements.
How long does a pool remodel take?
Pool remodeling timelines in Inglewood vary by scope. A resurfacing project with new tile and coping typically wraps up within a few weeks once construction begins, while a larger scope that adds a deck, spa, equipment pad, or shell repair generally runs two to three months. Design work, permit review through the City of Inglewood Building and Safety Division, and any HOA approvals happen before that window starts. The interior finish also requires a start-up period after the pool is filled, and we account for that in the overall schedule.
What drives the cost of a pool remodel?
Pool remodeling costs in Inglewood depend first on the condition of the shell once it is drained, the scope of work at the waterline, and the interior finish you select. Equipment upgrades range from a single pump swap to a full pad covering filtration, heating, automation, and replumbing. A spa addition, deck surface and square footage, safety features, and permit and plan check time through the City of Inglewood Building and Safety Division all factor in. Our written proposal breaks every item out line by line.
Do I have to switch to a variable-speed pump?
California’s Title 20 rules require any replacement dedicated-purpose pool pump motor of 0.5 total horsepower or more to be variable-speed. Such a pump runs long and slow for filtration, stepping up for the spa, a cleaner, or a water feature. Many Inglewood owners time it to a remodel in neighborhoods like Morningside Park, while the equipment pad is already being rebuilt.
Will I have to add pool safety features if I remodel?
California law requires at least two of seven listed drowning prevention features on any permitted pool or spa remodel at a single-family home, covering options such as mesh fencing with a self-closing gate, a safety cover, door exit alarms, or a pool alarm, though certain pairs do not qualify together as two. In Inglewood, where many homes date to the postwar tract-building era and yards tend to run compact, the choice of features matters for both function and fit. We work through the combination with you during design so it suits how your family uses the yard and clears final inspection with the City of Inglewood Building and Safety Division.
Explore More in Inglewood
Horizon is a licensed Class B general building contractor serving Inglewood and the surrounding Los Angeles County communities.