Design Center & Showroom · 614 S Euclid St, Fullerton · Mon–Fri 9am–5pm

Pool Remodeling in Paramount

Rough plaster, crusted waterline tile, a pump running loud all day, and a deck that has settled and split. That is a familiar picture in Paramount. The city incorporated in 1957 after the Hynes and Clearwater communities merged in 1948, when hay and dairy land gave way to postwar homes. Pools in the historic Hynes and Clearwater sections, near Spane Park, and along the Paramount Boulevard corridor are often on their second or third finish with original-era equipment still in place. A pool remodel coordinated by Horizon covers resurfacing, tile and coping, decking, a new equipment pad, and the safety features a permitted remodel requires, with specialty trade work performed by appropriately licensed subcontractors and the project planned with the rest of the yard and built under one contract.

Services We Offer

Equipment Upgrades

Spa Additions

Safety & Drain Covers

Our Pool Remodeling Process in Paramount

Pool remodeling in Paramount begins with a close look at what you have: the shell, the deck, the equipment pad and the surrounding yard. Many of the homes here were built in the postwar decades on compact lots, and the backyard space around a pool is often tight, so we plan the deck layout and equipment placement carefully before anything is selected or removed. You choose the interior finish, waterline tile, coping and deck material early, and we work through the required drowning prevention features with you so the permit application goes in complete. Plans and energy compliance forms are submitted to the City of Paramount Building and Safety and Planning department, and we handle plan check responses through that process.

Once the permit is issued, the pool is drained and the old tile, coping and deck come out. The shell gets a thorough inspection at that point, and any structural or plumbing repairs are done before new work goes on top. Equipment, electrical and gas connections follow, then tile, coping and the new deck surface. The interior finish is applied last, the pool is filled and carried through the startup period the finish manufacturer specifies. Final inspection confirms all safety features are in place, and we walk you through operating the new equipment before we close out the job.

Paramount’s building permits run through the City of Paramount Building and Safety and Planning department, which covers permits, inspections and zoning for all residential work. Because no unusual local overlay applies here, the governing factors are straightforward: the California building code and the age of the house itself. That matters in a city where the housing stock is overwhelmingly postwar, built out after the former Hynes and Clearwater communities merged and incorporated in 1957. Homes from that era can carry aging underground plumbing, original electrical runs and shell finishes that have never been touched, so the condition of the existing pool tells us a great deal before the design conversation even starts.

Not every scope of work requires a permit, but the common triggers include adding a spa, altering the shape or depth, structural shell repair, installing a new heater, and running new gas or electrical lines. We identify which items apply during the design stage, not after work begins. Any permitted pool or spa remodel at a single-family home also brings in California’s Swimming Pool Safety Act under Health and Safety Code 115922, which requires at least two of seven listed drowning prevention features. Those features include an enclosure isolating the pool from the house, removable mesh fencing with a self-closing and self-latching gate, an approved safety cover, exit alarms or self-closing and self-latching devices on doors leading to the pool, and a pool alarm. The inspector confirms compliance before the final is issued.

Drain covers are a separate safety requirement. Under the federal Virginia Graeme Baker Act, drain covers must meet the anti-entrapment standard, and we replace non-compliant covers as part of the standard scope. On the equipment side, California Title 20 rules require that replacement dedicated-purpose pool pump motors of 0.5 total horsepower or more manufactured on or after July 19, 2021 be variable-speed. California’s 2025 energy code also restricts the heat source for newly installed pool and spa heating, though an exception applies to alterations where heating already exists. New equipment, lighting and any metal near the water must also satisfy bonding and GFCI requirements under the California Electrical Code, so a licensed electrician reviews the existing bonding grid whenever the deck comes up.

Draining the pool gives us the clearest view of the shell. Surface crazing is expected on older plaster, but structural cracks in a gunite or shotcrete shell, or a failing bond beam beneath the coping, are addressed before any new finish is applied, and that repair is documented in a written change order. In established residential sections throughout Paramount, including areas around Spane Park and the historic Hynes and Clearwater neighborhoods, some properties also fall under HOA review for decking, fencing and equipment placement. Where that applies, we coordinate the HOA approval alongside the city permit process so neither one holds up the other.

Other Remodeling Services We Offer

Why Choose Horizon Remodeling For Pool Remodeling in Paramount

Horizon Construction and Remodeling is a licensed and bonded Class B general building contractor, and our license has been active since 2009. We approach pool remodeling as part of broader backyard work rather than a standalone trade, so the pool, decking, hardscape, patio cover, or outdoor kitchen all move forward under a single contract with one project manager overseeing the job from start to finish. Pool-specific work is carried out by licensed subcontractors coordinated under that contract.

That structure matters in Paramount, where homes are overwhelmingly postwar construction on compact lots. Coordinating every trade under one plan means a gas line or equipment pad connection gets addressed before new concrete goes down, not after. Permits go through the City of Paramount Building and Safety and Planning department, and because no unusual local overlay applies, the age of the house and the standard building code are what govern the scope of work. We handle the permit process as part of our contract.

Proposals are written line by line, so you can see exactly what each part of the project covers and decide what makes sense to do now and what can wait for a later phase. Contact us today to request a free estimate.

Schedule a Consultation

Clients Love

Pool Remodeling FAQ

Rectangular swimming pool with a paver deck and lounge seating
Mission Viejo, CA Bathroom Remodeling Experts - Horizon Remodeling & Construction
Pool Construction project by Horizon Construction & Remodeling
Single-story home exterior with a swimming pool, stone deck and covered patio
How do I know if my pool in Paramount needs resurfacing or just a repair?

A chipped step or a few loose tiles may need only a repair. When the surface is rough, stained, flaking, or sounds hollow when tapped, resurfacing is the right move. Water loss that outpaces evaporation is another warning sign worth investigating. Paramount’s compact postwar lots leave little margin for a misdiagnosis, so we inspect in person. Once the pool is drained, we can tell whether cracks are in the finish or in the shell, and that distinction drives the scope.

Pool remodeling in Paramount often does require a permit, and the application goes through the City of Paramount Building and Safety and Planning department. Work such as adding a spa, altering the shell, structural repairs, or new gas and electrical connections typically triggers a permit, while a straight replaster with no other changes may not. We handle the application, plan check, and inspections either way, and a permitted remodel also brings state drowning prevention requirements into scope.

Pool remodeling timelines in Paramount vary by scope. A resurfacing with new tile and coping typically wraps up within a few weeks once work is underway, while a larger remodel involving a new deck, equipment pad, spa addition, or shell repair can run two to three months. Before any of that begins, design, plan check, and permits through the City of Paramount Building and Safety and Planning department add time that depends on review schedules. The interior finish also requires a start-up period after the pool is filled, and we build that into the overall schedule from the start.

Pool remodeling costs start with the waterline condition, the interior finish, and what the shell looks like once it’s drained. Equipment comes next, from a pump swap to a full pad with filter, heat pump, automation, and replumbing. Paramount’s postwar lots are compact, so deck area and material also carry weight. A spa addition, safety features, and permit and plan check time all add to the total. Our written proposal itemizes every line.

California’s Title 20 regulations require any replacement dedicated-purpose pool pump motor rated at 0.5 horsepower or more to be variable-speed, so that is what you are buying when the old motor goes. These units filter at a slow, steady pace and ramp up on demand for the spa, a cleaner, or a water feature. Many Paramount homeowners schedule this swap during a remodel while the equipment pad is already open.

California law requires at least two of seven listed drowning prevention features on any permitted pool or spa remodel at a single-family home, such as mesh fencing with a self-closing gate, a safety cover, door exit alarms, or a pool alarm, though certain pairs do not qualify together as two. Paramount’s postwar housing stock, most of it on compact lots, shapes which combinations work best for a given yard. We go through the options with you during design so the final selection fits how you use the space and clears inspection.

More Pool Remodeling Service Areas Near Paramount