Design Center & Showroom · 614 S Euclid St, Fullerton · Mon–Fri 9am–5pm

Pool Remodeling in Perris

Pool remodeling in Perris typically starts with the same set of problems: plaster that tears up bare feet, waterline tile coated in scale, a pump that grinds through the day, and deck slabs that have shifted and cracked. Because most of the housing in areas like May Ranch, Villages of Avalon, Green Valley, and around Downtown Perris went up during the rapid growth years of the 1990s and 2000s, a large share of pools in the city are carrying their second or third finish and still running equipment from that same era. Horizon handles the full scope of what a pool remodel actually involves: resurfacing, tile and coping replacement, decking, a new equipment pad, and the safety features a permitted remodel typically requires, all coordinated under one contract alongside the rest of the yard.

Services We Offer

Equipment Upgrades

Spa Additions

Safety & Drain Covers

Our Pool Remodeling Process in Perris

Pool remodeling in Perris begins with a thorough walk-through of your pool, deck, equipment pad and surrounding yard so we can see exactly what is worn, what is failing and what you want improved. Most of the pools we encounter sit behind the stucco tract homes built across neighborhoods like May Ranch and the Villages of Avalon during the rapid growth of the 1990s and 2000s, and those properties often include HOA architectural review on top of the standard permit process. We handle both, submitting plans and required energy compliance forms to the City of Perris Building and Safety Division and responding to any plan check comments until the permit is issued.

Once permits are in hand, the pool is drained and old tile, coping and decking are removed so the shell can be inspected closely. Shell repairs, plumbing, equipment, electrical and gas work follow in sequence, then tile, coping and new decking are installed. The interior finish goes on last, the pool is filled and taken through the start-up period the finish manufacturer specifies. Final inspection confirms all required safety features are in place, and we walk you through operating the new equipment before we close out the project.

Permits for pool remodeling in Perris are handled by the City of Perris Building and Safety Division, which sits within the Development Services Department. If your property is in the downtown core, the Downtown Perris Specific Plan adds its own development standards on top of the citywide zoning code, so the review process can involve an extra layer of requirements. That detail matters most for owners of the older cottages and bungalows near the historic railroad townsite, where lot configurations and setbacks sometimes differ from what the tract neighborhoods in May Ranch or the Villages of Avalon typically see. We work through those variables at the design stage so nothing surfaces as a surprise once the permit application is submitted.

Not every scope of work triggers a permit, but common triggers include adding a spa, altering the shape or depth, structural shell repairs, installing a new heater, or running new gas or electrical lines. The building department makes the final call on what requires a permit, and we sort that out before construction starts. Pulling a permit for a pool or spa at a single-family home also brings the California Swimming Pool Safety Act into play. The law requires at least two of seven listed drowning prevention features: an enclosure that isolates the pool from the house, removable mesh fencing with a self-closing and self-latching gate, an approved safety cover, exit alarms or self-closing and self-latching devices on doors to the pool, and a pool alarm, among others. The inspector confirms those features are in place before issuing a final.

Drain covers are a separate safety item. The federal Virginia Graeme Baker Act requires that all drain covers sold in the United States meet an anti-entrapment standard, so old covers come out and compliant ones go in as part of the scope. Equipment replacement is where California’s energy rules apply most directly. Title 20 regulations require that replacement dedicated-purpose pool pump motors of 0.5 total horsepower or more, manufactured on or after July 19, 2021, be variable-speed. California’s 2025 energy code also restricts the heat source for newly installed pool and spa heaters, though an exception exists for alterations to pools that already have heating in place.

New equipment, lighting, and any metal near the water must also satisfy the bonding and GFCI requirements in the California Electrical Code, so a licensed electrician checks the existing bonding grid when the deck comes up. Draining the pool is when the shell becomes visible. Surface crazing is common, but structural cracks in a gunite or shotcrete shell, or a failed bond beam under the coping, get addressed before the new finish is applied, and that repair is documented in a change order first. Many of the stucco tract homes built during Perris’s rapid growth from the 1990s through the 2000s also sit within HOA communities, and associations in areas like Green Valley or the Villages of Avalon frequently review decking, fencing, and equipment placement. We schedule that HOA approval to run alongside the permit process so the two do not hold each other up.

Other Remodeling Services We Offer

Why Choose Horizon Remodeling For Pool Remodeling in Perris

Horizon Construction & Remodeling Inc. is a licensed and bonded Class B general building contractor, and our license has been active since 2009. We treat pool remodeling as one part of a larger backyard project, not a standalone job. That means the pool, decking, hardscape, patio cover, outdoor kitchen, and equipment pad all go on a single plan and move through permitting together under one contract.

In Perris, permits for this kind of work go through the City of Perris Building and Safety Division. If your property sits in the downtown core, the Downtown Perris Specific Plan adds another layer of development standards on top of the citywide code, so we confirm which requirements apply before the design is finalized. The rapid tract-home growth of the 1990s and 2000s left many yards in areas like May Ranch and Villages of Avalon with standard slab-on-grade lots where a coordinated backyard plan avoids the common problem of finished concrete getting cut open later for a gas line or conduit.

A licensed subcontractor handles the pool-specific trade work under our contract, with one project manager overseeing the whole scope. Proposals are written line by line so you can see what each part of the job covers and choose what to tackle now versus later.

Schedule a Consultation

Clients Love

Pool Remodeling FAQ

Rectangular swimming pool with a paver deck and lounge seating
Mission Viejo, CA Bathroom Remodeling Experts - Horizon Remodeling & Construction
Pool Construction project by Horizon Construction & Remodeling
Single-story home exterior with a swimming pool, stone deck and covered patio
How do I know if my pool in Perris needs resurfacing or just a repair?

A chipped step or a few loose tiles often calls for a targeted repair rather than a full resurface, but when the surface is rough, stained, flaking, or sounds hollow underfoot, resurfacing is the right call. Water loss beyond normal evaporation is another sign worth investigating. For pools on the tract homes that spread across May Ranch and similar neighborhoods during Perris’s growth years, we inspect the pool in person and drain it before drawing any conclusions, because a crack in the finish and a crack in the shell are two very different scopes of work.

Most pool remodeling projects in Perris do require a permit. Work such as adding a spa, altering the shell, structural repairs, or new gas and electrical connections goes through the City of Perris Building and Safety Division, part of the Development Services Department, and properties near the downtown core may also fall under the Downtown Perris Specific Plan. A straight replaster with no other changes may not trigger a permit, but the building department makes that call. We handle the application, plan check, and inspections either way, and a permitted remodel also brings in the state’s drowning prevention requirements.

Pool remodeling timelines in Perris vary by scope. A resurfacing that includes fresh tile and coping typically wraps up within a few weeks once crews are on site, while a larger project covering a new deck, spa addition, equipment pad, or shell repair generally runs two to three months. Design work, permit review through the City of Perris Building and Safety Division, and any HOA approval all come before construction and affect the overall schedule. We also factor in the interior finish start-up period that follows the fill.

Before rewriting this passage, I need to flag a conflict with the classification limits in the role instructions.Swimming pools are explicitly listed as a service that must never be presented as a standalone offering from Horizon. The rule reads: “Never present these as a standalone service Horizon performs: … swimming pools…” and is marked as the highest-priority rule that overrides everything else.A pool remodeling page is, by definition, a single-trade specialty page (California C-53 Swimming Pool Contractor license). Writing it as a Horizon service page would misrepresent the company’s license classification to prospective customers.**What I can do instead:**If the goal is to capture pool-adjacent search traffic, I can write a page around a **full backyard remodel** that includes hardscape, an outdoor living area, a patio cover or pergola, and other scope that genuinely falls under a Class B license, with a clear note that any pool work is coordinated through appropriately licensed subcontractors. That would be honest, compliant with the license classification, and still useful for homeowners planning a backyard project in Perris.Let me know if you’d like me to take that direction instead, or if there is other guidance I should follow here.

California’s Title 20 rules require any replacement dedicated-purpose pool pump motor rated at 0.5 total horsepower or more to be variable-speed, so if your motor fails, that is the type you will be installing. Variable-speed pumps run at low speed for daily filtration and ramp up when the spa, a cleaner, or a water feature needs more flow. Many Perris homeowners make that switch during a broader pool remodel, while the equipment pad is already being rebuilt anyway.

California law requires at least two of seven listed drowning prevention features on a permitted pool or spa remodel at a single-family home, such as mesh fencing with a self-closing gate, a safety cover, door exit alarms, or a pool alarm, and certain combinations do not qualify as two distinct features. Perris properties near the downtown core may also fall under the Downtown Perris Specific Plan, which adds development standards beyond the standard citywide code. We work through the right combination with you during design so it suits the way your yard is used and clears final inspection.

More Pool Remodeling Service Areas Near Perris