Design Center & Showroom · 614 S Euclid St, Fullerton · Mon–Fri 9am–5pm

Pool Remodeling in Costa Mesa

Pool remodeling in Costa Mesa typically starts with the same set of problems: plaster that scrapes your feet, waterline tile coated in scale, aging pump equipment that runs constantly, and deck concrete that has cracked and shifted over the decades. Costa Mesa grew from a semi-rural farming community of roughly 16,840 residents at its 1953 incorporation into a fully built-out suburb within about thirty years, which means pools throughout Eastside, Westside, Mesa Verde, and Mesa del Mar are often on their second or third finish and still running equipment from that original era. Horizon coordinates the full scope of work under one contract: resurfacing, tile and coping replacement, deck repairs, equipment pad upgrades, and the safety improvements a permitted remodel requires, with the City of Costa Mesa Building and Safety Division handling the permit review.

Services We Offer

Equipment Upgrades

Spa Additions

Safety & Drain Covers

Our Pool Remodeling Process in Costa Mesa

How Pool Remodeling in Costa Mesa Actually Works

Pool remodeling in Costa Mesa begins with a thorough walk-through of the pool shell, deck, equipment pad, and surrounding yard so we can see exactly what is worn, what is failing, and what you want to change. Because most Costa Mesa homes are postwar tract houses built on slabs, the backyard layout and the existing deck conditions shape what is practical from the start. You choose the interior finish, waterline tile, coping, and decking before any demolition begins, and we work through the required drowning prevention features with you so the plans are complete when we submit them. Permits go through the City of Costa Mesa Building and Safety Division, and where an HOA architectural review applies, we handle that submission as well.

Once the permit is issued, the pool is drained and the old tile, coping, and deck are removed so the shell can be closely inspected. Shell repairs, plumbing, equipment, and electrical work follow, then tile, coping, and the new deck surface. The interior finish is applied last, the pool is filled, and we carry it through the start-up period the finish manufacturer specifies. Final inspection covers the safety features, and we walk you through operating the new equipment before we close out the project.

Costa Mesa’s postwar buildout means most of the pools we work on were installed decades ago, often during the same era the tract homes around them were built. In neighborhoods like Mesa Verde, Eastside, and Mesa del Mar, that history shows up in the shell itself. When we drain the pool, we can finally see the full picture. Surface crazing is normal wear on an older gunite or shotcrete shell, but structural cracks or a failed bond beam under the coping have to be repaired before any new finish goes on. We document that work in a change order before touching it, so there are no surprises on the invoice.

Permits for pool remodeling in Costa Mesa go through the City of Costa Mesa Building and Safety Division. Not every repair triggers one, but adding a spa, altering the shape or depth, structural shell work, a new heater, and new gas or electrical runs are the usual thresholds. We sort out what requires a permit at the design stage, before anything is ordered or scheduled. Because no unusual local overlay applies here, the California building code and any applicable HOA rules are what govern the project. In Eastside, Mesa Verde, and other established areas where associations are active, HOA review of decking, fencing, and equipment placement gets scheduled alongside the city permit so neither approval holds up the other.

A permit on a single-family pool or spa remodel brings California’s Swimming Pool Safety Act into play. The pool must have at least two of seven listed drowning prevention features: an enclosure isolating the pool from the house, removable mesh fencing with a self-closing self-latching gate, an approved safety cover, exit alarms or self-closing self-latching devices on doors leading to the pool area, or a pool alarm. The inspector verifies compliance before issuing a final. Drain covers fall under the federal Virginia Graeme Baker Act, which requires anti-entrapment compliant covers on all drains sold in the United States. We replace old covers with compliant ones as part of the standard scope.

Energy rules govern the equipment side of the project. Under California Energy Commission Title 20 requirements, replacement dedicated-purpose pool pump motors of 0.5 total horsepower or more manufactured on or after July 19, 2021, must be variable-speed. California’s 2025 energy code also limits the heat source for newly installed pool and spa heating, though an exception applies to alterations on pools that already have a heating system. New equipment, lighting, and any metal near the water must also meet bonding and GFCI requirements under the California Electrical Code, and a licensed electrician checks the existing bonding grid whenever the deck surface comes out.

Other Remodeling Services We Offer

Why Choose Horizon Remodeling For Pool Remodeling in Costa Mesa

Horizon Construction and Remodeling is a licensed Class B general building contractor, bonded, and in business since 2009. We approach pool remodeling as part of broader backyard work rather than a standalone trade, so the pool resurface or rebuild sits on the same plan as the decking, hardscape, patio cover, or outdoor kitchen surrounding it. Pool-specific trades are handled by licensed subcontractors coordinated under our contract, with one project manager overseeing the full scope.

That single-contract structure matters on a typical Costa Mesa postwar lot, where the yard is compact and trades overlap. Sequencing the gas line, equipment pad, and new concrete together from the start means we are not cutting through finished hardscape later to run a line that should have gone in first. Permits for this work go through the City of Costa Mesa Building and Safety Division, and we handle that coordination as part of the project.

Our proposals are written line by line, so you can see exactly what each part of the job covers and make informed decisions about what to complete now and what to phase later.

Schedule a Consultation

Clients Love

Pool Remodeling FAQ

Rectangular swimming pool with a paver deck and lounge seating
Mission Viejo, CA Bathroom Remodeling Experts - Horizon Remodeling & Construction
Pool Construction project by Horizon Construction & Remodeling
Single-story home exterior with a swimming pool, stone deck and covered patio
How do I know if my pool in Costa Mesa needs resurfacing or just a repair?

A localized repair handles problems like a chipped step or a few loose tiles, but if the surface is rough, stained, flaking, or sounds hollow when tapped, full resurfacing is the better call. Water loss that exceeds normal evaporation is another warning sign worth investigating. We assess the pool in person, and once it is drained we can determine whether cracks are limited to the finish or extend into the shell, which directly affects the scope of the work needed in Costa Mesa.

Most pool remodeling projects in Costa Mesa do require a permit. Work like adding a spa, altering the shell, structural repairs, or new gas and electrical connections goes through the City of Costa Mesa Building and Safety Division, and a permitted remodel also triggers the state’s drowning prevention requirements. A straight replaster with no other changes may not need one, but that call belongs to the building department. We handle the application, plan check, and inspections either way.

Pool remodeling in Costa Mesa typically takes a few weeks for a straightforward resurfacing with new tile and coping, while a larger scope involving a new deck, spa addition, equipment pad, or shell repair generally runs two to three months once construction begins. That timeline does not include the design phase, plan check at the City of Costa Mesa Building and Safety Division, or any HOA review, all of which come first. After the fill, the interior finish also requires a start-up period that we account for in the overall schedule.

Pool remodeling costs in Costa Mesa depend first on the condition of the shell once it’s drained, the scope of work at the waterline, and the interior finish you select. Equipment upgrades add cost quickly, whether that means swapping a pump or rebuilding the full pad with a new filter, heat pump, automation system, and replumbing. A spa addition, changes to the deck area or material, and required safety features each carry their own line item, as does plan check time through the City of Costa Mesa Building and Safety Division. Our written proposal breaks every element out separately so nothing is buried.

Yes, if your pump motor fails and needs replacement, California’s Title 20 rules require any dedicated-purpose pool pump motor of 0.5 total horsepower or more to be variable-speed. That motor runs slow during filtration and speeds up for a spa, cleaner, or water feature. Many Costa Mesa homeowners handle the switch during a broader remodel, while the equipment pad is already being rebuilt and permits are moving through the City of Costa Mesa Building and Safety Division.

Yes, a pool or spa remodel at a single-family home in California typically requires a building permit, and state law ties that permit to drowning prevention: at least two of seven listed safety features must be in place, covering options such as mesh fencing with a self-closing gate, a safety cover, door exit alarms, or a pool alarm, though certain pairings do not satisfy the two-feature requirement. In Costa Mesa, permits go through the City of Costa Mesa Building and Safety Division. We work through the right combination with you during design so it suits how your yard is used and clears final inspection.

More Pool Remodeling Service Areas Near Costa Mesa